Experiments were carried out on natural convection heat transfer from longitudinal trapezoidal fins array heat sink subjected to the influence of orientation. A trapezoidal fins heat sink with various orientations tested under a controlled environment. Test results indicate that the sideward horizontal fin orientation yield the lowest heat transfer coefficient. However the sideward vertical fin orientation gave the best performance on the natural cooling. From the experiments Nu is determined as a function of Ra at Pr=0.7 for each orientation with Ra ranging between (1400 and 3900).From the results; Heat transfer coefficient of the sideward vertical fins is higher by (12%) than the heat transfer coefficient of the upward while it is higher than the heat transfer coefficient of the downward by (26%) and by (120%) with the sideward horizontal fins. Orientation affected the temperature distribution along the fins, therefore the temperature along the sideward vertical fins have the best performance with uniform distribution, while in sideward and downward the temperature increased in the positions near the base plate surface because of the complication in moving the heated air.
This article presents a numerical study on forced convection of nanofluid flow in a two-dimensional channel with trapezoidal baffles. One baffle mounted on the top wall of channel and another mounted on the bottom wall of channel. The governing continuity, momentum and energy equations in body-fitted coordinates are iteratively solved using finite volume method and SIMPLE technique. In the current study, SiO2-water nanofluid with nanoparticles volume fraction range of 0- 0.04 and nanoparticles diameters of 30 nm is considered for Reynolds number ranging from 100 to 1000. The effect of baffles height and location, nanopar-ticles volume fraction and Reynolds number on the flow and thermal fields are investigated. It is found that the average Nusselt number as well as thermal hydraulic performance increases with increasing nanopartiles volume fraction and baffle height but accompanied by increases the pressure drop. The results also show that the best thermal- hydraulic performance is obtained at baffle height of 0.3 mm, locations of baffles at upper and lower walls of 10 and 15 mm, respectively, and nanoparticles volume fraction of 0.04 over the ranges of Reynolds number.
The reliability of water supply system is a critical factor in the development and the ongoing capability to succeed in life and people's health. Determining of its, with high certainty, for performance of water supply system is developed to ensure the sustainability of system. Reliability (Re) plays a great role in evaluation of system sustainability. The probability approaches have been used to evaluate the reliability problems of systems. The probability approach is failed to address the problems of reliability evaluation that comes by subjectivity, human inputs and lack of history data. This research proposed two models; I) traditional model: fuzzy reliability measure suggested by Duckstein and Shresthaand then developed by El-Baroudy; and II) developed model: fuzzy reliability-vulnerability model. The two models implemented and evaluation of water supply system by using two hypothetical systems (G and H). System (G) consists of a single pump and System (H) consists of a two parallel pumps. Triangular and trapezoidal membership functions (MFs) are used to investigate of the reliability measure to the form of the membership function. The results agree with expectations that the reliability of parallel component system {ReH (0.53)} is higher than the reliability of single component system {ReG (0.47)}. Moreover, the result by using fuzzy set reduces the effect of subjectively in process of decision-making (DM). The fuzzy reliability vulnerability is able to handle different fuzzy representations and different operation environment of system