The concrete members several blessings over steel beam, like high resistance to prominent tem-perature, higher resistance to fatigue and buckling, high resistance to thermal shock, fire re-sistance, robust resistance against, and explosion. However there are some disadvantages as a result of exploitation totally different materials to product it. The most downside of structural concrete member is its deprived the strength to tensile stresses.The bond mechanism between steel bars and concrete is thought to be influenced by multiple parameters, like the strength of the encompassing media, the prevalence of cacophonous cracks within the concrete and therefore the yield stress of the reinforcement. However, properties of concrete mass has significantly effect when it was subjected to elevated temperature.The objective of this paper presents the results that allocating with the bond behavior of the rein-forcement of steel bar systems below static pull-out loading tests subjected to elevated tempera-tures. This numerical technique relies on relative slip and therefore the stress of bond distribu-tions done the embedded length and size of the bar within the concrete cylinder specimens. The obtained results square measure given and commented with the elemental characteristics of ferroconcrete members. The comparison showed smart agreement with experimental results
In this study an attempt is made to develop a method of analysis dealing with a multi-layer composite continuous beam , for linear material and shear connector behavior in which the slip (horizontal displacement) and uplift force (vertical displacement) are taken into consideration. The cross-sectional area for the beam consists of three layers varying in thickness and shear stiffness. The analysis is based on a approach presented by Roberts[1], basically for two layer simply supported beam, under uniform and point loads , which takes into consideration horizontal and vertical displacement in interfaces. The analysis led to a set of eight differential equations containing derivatives of the fourth and third order. A program based on the present analysis is built using finite difference method using boundary conditions. A comparison between the present analytical solution and previous studies shows close agreement. Continuous composite beams are very important element in construction of high rise buildings , multi-story frames and bridges, due to great advantages that can be obtained by using this sort of structural elements, such as reducing the beam moments, suitable reduction in deflections. The model deals with continuous beam consisting from three layers as a cross-sectional area with inter-layer slip. The cross-sectional area consist of composite material including intermediate layer from concrete and an upper and lower material with high strength in tension and compression ( i.e. steel plates or steel beams )
In this study an attempt is made to derive governing equations satisfying equilibrium and compatibility, for multi-layer composite simply supported beam under blast loading , for linear material and shear connector behavior in which the slip (horizontal displacement) and uplift force (vertical displacement) are taken into consideration. The analysis is based on an approach presented by Roberts, which takes into consideration horizontal and vertical displacements in interfaces. The model consists of a simply supported beam with three layers having a cross-sectional area ,different dimensions and material properties. The analysis led to a set of six differential equations containing derivatives of the fourth and third order. The blast loading was considered as a function of time. Explosions have different effects including blast, penetrations and fragmentation. The blast is the main effect which hits the structure in short duration. Multi –layer composite construction is the best type of constructions to resist the blast loading ; according to this , multi-layer composite construction is used for air-craft and marine industries. Analysis of composite beam under blast load , taking in consideration vertical and horizontal displacements, leads to six differential equations , the load is taken as a function of time.
This paper presents the experimental results of composite slabs under static and impact loading. Total of six specimens classified one specimen test under static loading and the remaining five were tests under impact dynamic loading with different parameters as type of connections and degree of interaction of composite slab. Low - velocity impact test was adopted by select the falling mass (4 kg) made from steel material and formed as ball shape without nose. The ball dropped freely from height of (2.4 m) and strikes the top of composite slab. The designed dimensions of specimens is (500×500×60 mm) as reinforced concrete slab that reinforced by mesh of (RBC) and the steel plate is (3 mm) in thickness. Deflection due to first crack is recorded, number of blows caused first crack and failure were counted. The test results showed that the welded stud connectors gives high strength capacity and resistance under static and impact dynamic loadings than other than type of connections, also, full interaction as degree of interaction is better than others