The purposes of planning for housing and solve the housing problem of the most important topics in studies of housing also it is one of the topics broad and complex, and that the planned housing in accordance with the cost and social benefit is the solution to reduce the heights fantasy of the costs of housing. Also its negative effects on the process of housing where most of Iraq's society of the middle class is needed to adequate housing with income, especially if we consider that there is a deficit of housing dramatically in Iraq. Which is estimated at more than three million housing units and offset by a significant decrease in the rates of housing construction, also which are led to the worsening problem of housing in the country, especially those with low income, so it requires the parties responsible speed up the adoption of the strategy to solve the problem of housing in the country adopt the principle of the establishment of residential low-cost through the adoption of residential buildings, multistorey (3-4) stories as characterized by the buildings of the densities of housing appropriate of effective use with economic land and reduce the costs of housing to meet the large deficit and demand residentialdemand. In order to reach the desired goal has been studied and the reality of the housing in Ramadi in the, Ta'meem, 5 km and the 7 km areas and limited the problems of constraints related with planning housing also its components as well as access to some of the experiences of countries in planning, housing and solving the housing crisis within finding the alternatives to some traditional building materials with finding teams cost whenusingthesealternatives. Also supports research field study of three residential compounds, which aims at evaluating the appropriateness of such style housing and how to achieve social benefits and meet the standards of planning and design proposed in the scheme of public housing in Iraq which have been using the method (analysis of cost - benefit) for the trade-off to choose the best alternative of residential complexes three (and low cost, Ta'meem, the 7 km), which achieves less expensive and better utility.
This research investigates the impact resistace of reinforced high strength concrete slabs with steel meshes (BRC) modified by styrene butadiene rubber (SBR) with different weight ratios of polymer to cement as follows: 3%, 5% and 7%. Reference mix was produced for comparison of results. For all selected mixes, cubes (100×100×100mm) were made for compressive strength test at (365) days. In conducting low-velocity impact test, method of repeated falling mass was used: 1400gm steel ball falling freely from height of 2400mm on reinforced panels of (50×50×800 mm) reinforced with one layer of (BRC). The number of blows causing first crack and final perforation (failure) were calculated, according to the former results, the energy of each case was found. Results showed an improvement in compressive strength of polymer modified high strength concrete (PMHSC) over reference mix; the maximum increase being of it were (3.93%-11.96%) at age of (365) days. There is significant improvement in low-velocity impact resistance of all polymer modified mixes over reference mix. Results illustrated that polymer modified mix of (3%) give the its higher impact resistance than others, the increase of its impact resistance at failure over reference mix was (154.76%) while, for polymer modified mix (5%) it was (30.95%) and it was (14.28%) for polymer modified mix of (7%).
Nowadays, renewable energy sources are becoming further utilized to produce electricity. Fuel cell (FC) is one of the encouraging renewable and sustainable power resources as a result of its high power density and extremely low release. This paper presents suggestion and implementation of FC power system. So as to design a greatly efficient FC power system, proper DC - DC and DC - AC converters are needed. Among the different types of DC - DC converters, Interleaved Boost Converter (IBC) has been proposed as appropriate interface between FC and the next stage to transform the produced power energy (low voltage high current input into a high voltage low current output of the FC). 11-level Neutral Point Clamped (NPC) Multilevel Converter (MLC) is proposed for converting the DC output of the IBC to AC voltage to feed the load. MLC is chosen because it has many attractive features like high voltage capability, smaller or even no output filter, low voltage stress on load. Simulation of the proposed FC power system has been performed using MATLAB/SIMULINK..
Milling includes a variety of different tasks and tools, ranging from small individual pieces to large, powerful group processes. It is one of the most commonly used techniques for producing custom parts with exact tolerances. Surface roughness of machined parts has a significant impact on the finished item's quality, which may have an impact on its tolerance and performance. This paper studies the prediction of the values of surface roughness of low-carbon steel AISI 1015 in milling operations. Three different machining parameters with nine variable samples are selected to investigate the resultant surface roughness of the AISI 1015 low-carbon steel samples, including different spindle speeds, feed rates, and depths of cut. The results revealed that the feed rate of 100 mm/min at a spindle speed of 930 rpm and a depth of 1.5 mm produced the lowest surface roughness (Ra) value of 1.170 µm, while the feed rate of 300 mm/min at a spindle speed of 1100 rpm produced the greatest surface roughness value of 2.605.
In this research we have prepared a composite material by using Vegetative Cellulose Fibers of Cannabis (Cann F) to reinforced a matrix of Unsaturated Polyester (UP) resin. This kind of fibers is distinguished by good properties such as high tensile strength, low elongation, thermal resistance and low cost. The impact strength was tested by using Charpy method for three materials (UP resin), composite (UP / Cann F) and composite (UP/Glass F). The results indicated that the fracture energy (Uc) decreased as the notch depth (a) increased on the sample from (0.7 mm) up to (4.9 mm). However, the fracture energy increased as the temperature of the composite increased for different temperatures of (0, 35, 50 and 75) oC. It was noticed that the Material toughness (Gc) has been improved significantly, where in case of the composite (UP /Cann F), the improvement of (Gc) was from (2.45 kJ/m2 ) to (14.5 kJ/m2 ) and it was (17 kJ/m2 ) for composite (UP/GF) has been measured at (35) oC. When those composite materials (UP/Cann F) exposed to humidity for a period of (72 hrs) without immersion, their properties did not change, hence the effects are not of chemical but of physical nature. The conclusion, the difference between the toughness of the material (Gc) for the reinforced composites by Cannabis and E-glass fibers for all temperatures is not large, so this encourage the development of Cannabis fiber reinforced composites in the future to abundance, and low cost for industrial investment
Flow of crude oil in pipelines suffers from a problem of fluid flow pressure drop and high energy consumption for fluid pumping. Flow can be enhanced using either viscosity reduction or drag reduction techniques. Drag reduction (DR) is considered as a most effective and most applicable method. The technique contributes in reducing the frictional energy losses during the flow by addition of little amounts from drag reducing agents. The present work focuses on preparation and application of a new natural and low cost material derived from palm fiber (PF) that has been tested as a drag reducing agent (DRA) for crude oil flow enhancement. This objective has been achieved through designing and constructing of an experimental rig consisting of: a crude oil pipe, oil pump, pressure sensors, solenoid valve and programmable logic control. The additive material (PF) is prepared with different diameters (75µm, 125µm, 140µm) and tested with different concentrations as: 100, 200, 300, 400, and 500 mg/L for reducing the drag inside the oil pipe. The experimental results showed that the fiber with 125µm diameter and 100ppm is the best where the percentage of drag reduction reached 43%. Furthermore, the results of this work proved that PF is an efficient and low cost DRA that can be applied successfully in crude oil pipelines as well as its contribution in the waste management.
The impact resistances of concrete slabs have a different volume fraction replacement of waste plastic aggregate has been examined in this study as a fine aggregate as: 0% (reference), 10%, 20% and 30%. These tests include the splitting tensile, density, compressive strength. Also, the (ultrasonic pulse velocity tests) was carried out. Repeated falling mass was used in order to carry out the low-velocity impact test in which a 1300 gm steel ball was utilized. From a height of 2400mm, the ball falls freely on concrete panels of (500×500×50 mm) with a network of waste plastic aggregate. As per the results, a prominent development was seen in the mechanical properties for mixes involving polyethylene aggregate up to 20% as compared to the reference mix. A significant development was seen in low-velocity impact resistance of all mixes involving waste plastic fine aggregate as compared to reference mix. As per the results, the greater impact resistance at failure is offered by the mix with (20%) waste plastic aggregate by volume of sand than others. The reference mix increased by (712.5%).
The aerodynamic characteristics of forward swept wing were studied theoretically and experimentally .In the present work, theoretically a computer program was constructed to predict the pressure distribution about surface of the wing using three dimensional Low Order Subsonic Panel method. The aerodynamic coefficients of the wing were calculated from the pressure distribution which gained from tangential velocities Experimentally ,test were carried out by designing and manufacturing a wing model with special arrangement for pressure tapping, suitable for low wind tunnel testing. The entire wing was rotated rotate about an axis in the plane of symmetry and normal to the chord to produce different sweep and incidence angles for wing, by using rotating mechanism. Wind tunnel test was carried out at (Uپ‡=33.23m/s) for different swept angles and angles of attack.Comparisons were made between the predicted and experimental results. It is good and gave reasonable closeness. It was clear from the present investigation that the lift and drag characteristics for the forward swept wing are less in values compared with the swept back wing, therefore a forward swept wing can fly at higher speed corresponding to a pressure distribution associated for lower speed.
Housing is one of the main concerns raising critical problems in the Kurdistan Region. Due to the fast growth of the urban population through the last period, the Kurdistan-Investment Board was ongoing in construction of effective amount of housing estates by investment companies. Due to the rapid increase in population, many housing estate projects neglected specific family requirements, with low commitment to housing standards, quality of dwellings, and the resident's lifestyles. This study investigates living space and services parts of dwellings in those estates, finding out the factors that direct residential satisfaction supported by fixing correlations among determinants of overall satisfaction. The adopted methodology consists of evaluation based on two steps, the first was by a technical assessment using checklist comparing spaces with Iraqi standards, while the second part was through survey of resident's satisfaction. Field data collection had consisted of a questionnaire list and data collection performed for five housing projects (10 types of dwelling units covered by eighty-three samples) selected in Erbil city. Then the questionnaire results were analyzed using the SPSS program using correlations, regression, and descriptive statistics. Low commitment to Iraqi Standards was obvious in most cases. Results also showed that dwellers were satisfied with their dwelling units in cases despite differences with Iraqi urban housing standards. For instance, in two bedrooms dwellings, areas of services were below the standard by 21% while the resident's satisfaction in this group varied between neutral and satisfied. It had been found a clear correlation between indicators of dwellings units’ spaces. The regression has shown that the indicators of the kitchen location's size and shape highly affected the householder's satisfaction. The descriptive statistics have shown the satisfaction level mostly been neutral in all projects. Finally, the study suggests some recommendations regarding dwelling units in addition to the need to amend the Iraqi standards of housing.
The Organo modified and unmodified sodium montmorillonite clay effect on thermal and mechanical properties of the waste low density polyethylene (wLDPE) were studied. Commercialize unmodified (MMT) and Organo-modified clay (OMMT) were added to the wLDPE to prepare wLDPE-clay noncomposites by melt intercalation method. OMMT and MMT were added in a range of 1-5 wt %. Fourier transform infrared spectroscopy (FTIR) used to evaluate polymer structure before and after the fabrication. Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC) were used to analyse the thermal stability and thermal properties for the wLDPE and fabricated nanocomposites. Tensile mechanical characteristics of the waste specimens before and after nanocompsite fabrication were evaluated. The FTIR exhibited no change in the chemical structure of the wLDPE used after clay addition. Melting temperature and crystallization percentage were increased up to 1 wt% loaded and decreased in with clay content increasing when compared to the original waste matrix. The thermal steadiness of the wLDPE /clay nanocomposites were found enhanced in the case of loading 3 wt% of OMMT. The elastic modulus has improved in the 3% OMMT loaded.
This research project focused on examining and (rehabilitation) redesigning water networks in a city using the GIS-EPANET program in hydraulic network analysis. Due to the availability of outline data about the study area from the municipality's water distribution system (WDS), this study dealt with four cases. From a statistical calculation, the last case was best optimized, which resulted in a high pressure and an acceptable velocity as a result of high mean pressure (13.58) m, logical mean velocity (0.43) m/s, and accurate standard deviations of 1.214 and 0.48 for pressure and velocity, respectively. The study found that the network had a shortfall in pressure, estimated at 40%, due to the lack of expansion to accommodate the growing population. However, after conducting the analysis and identifying the problem, it was found that all regions were receiving adequate amounts of water. Nevertheless, the water speed in the pipelines throughout the network was deficient, below the recommended rate, with a minimum velocity of 0.02 m/s in the pipe (p3) but a minimum pressure of 7.02 m at the junction (607), indicating that the network design was ineffective. Comparing the results obtained with the real-world situation, it was discovered that the network has many violations and disruptions, causing water loss and resulting in low pressure reaching the customers. While the study found that the pressure inside the network was within acceptable modeling limits of (7–12) m, there was a reduction in the pressure charge due to the frequent use of water pumps inside the houses, especially as the circulated area was pumped further away. The error between the model and the real problem may be attributed to water leaks and disruptions from trees, gardens, landscaping, and livestock grazing, as well as the absence of a counter to calculate the water discharge volume to consumers
This work presents a compact reconfigurable antenna based on fractal geometry. The investigation discusses the challenges of lower antenna gain and bandwidth, critical for efficient data propagation in 5G systems, particularly for low-profile devices. Its goal is to develop a small, multiband antenna capable of operating in all current and future 5G bands and improve bandwidth and gain for mm-wave and sub-6 GHz applications. The proposed design covers the sub-6 band (2.8, 3.9, 4, 6.2) GHz and the mm-wave band (24.4, 27.1, 28.5, 29.3, 30.6, 33.9, 34.6, 35.2, 38.8, 44.4, 45.1, 59.7, 61.5, 62.3, 65.2, 67.4 and 69.5) GHz with S11 less than -10 dB. A maximum gain of 12.8 dB and a radiation efficiency of 94% are achieved. A partial ground plane with a 50 Ω feed line is used in this design. The antenna is printed on a Roger RT 5880 substrate with a relative dielectric constant 2.2 with a total dimension of 35×32.5×0.8 mm³. The proposed design is simulated using CST software, ensuring accurate calculations and performance evaluation.
High performance thermal insulators industries is recognized as one of most significant industries worldwide. This, of course, due to its basic role in industries requiring elevated temperatures. Concerning this target, a former study was performed in production of a thermal insulator containing locally available kaolin taking into consideration the effect of ignition temperature and grain size on the general specifications of the insulator. The low alumina content in kaolin samples , as shown by analysis, has resulted in lowering both the softening and melting points. It is planned in this research to study the effect of soaking time and added alumina on improving physical, thermal and mechanical properties of kaolin sample. Certainly, better properties of sample will result in better performance towards thermal insulation and to be more effective in resisting elevated temperature without affecting other properties.
The increasing price of fossil derivatives, global warming and energy market instabilities are a major problem. In recent years, these problems led to an increasing using of renewable energy sources such as wind energy. Wind turbine used to extract this energy from the wind to produce power or electricity. Due to low cost, easy for maintenance and it is, portability the most com-monly used among wind turbines is small axis wind turbine. Analysis to optimization power coef-ficient ( ) of a small wind turbine blade design model (Primus Wind power AIR 40 Wind Tur-bine 12VDC) are evaluated and discussed in this study. A shape of blade wind turbine is the pri-mery parapeter affected the power output of wind turbine. In this type of turbine NACA2411 used as the blade airfoil as represent shape of blade. For this goal, 185 different airfoils selected. For this purpose, using the XFOIL software to simulate the properties of each airfoil at Re (1.0*105, 1.5*105, 2.0*105, 2.5*105, 3.0*105 and 3.5*105) and angle of attack from 0˚ to 10˚, Then elimination criteria was performed for removing those airfoils would not suitable for the purpose up on their effiency. At the end of analysing Matlab software used for calculate the power coeffi-cient and selecting the best airfoils design for used manufacture anew blade for that type of small wind turbine with better power coefficient. The output of XFOIL and matlab software showed by tabulates and graphs. As a results show 3 airfoils were selected due to their performance better than other airfoils from an initial group of 185 as exemplification of the methodology namely S1210,SD7034 and S2091, The maximum that has been achieved by which used airfoil S1210 equal to 0.52 at Re 350000.
In most cases, the concrete wall panels are subjected to axial eccentric distributed loading; due to this type of loading, concrete wall panels behave and fail somehow. There are many parameters that affect the structural behavior of the concrete wall panels. This study presents experimental investigation the structural behavior of concrete wall panels subjected to axial eccentric distributed loading; also evaluates the effect of the parameters, slenderness ratio (H/t), aspect ratio (H/L) and concrete strength on the behavior of concrete wall panels. The experimental program includes testing fifteen concrete wall panels hinged at top and bottom with free sides, by applying the load axially with eccentricity equal to (t/6); these panels are divided into five groups, each group consists of three panels with slenderness ratio (H/t) equals to (20 , 25 , 30) for each panel, three groups of normal concrete strength with aspect ratio (H/L) equal to (1.0 , 1.5 . 2.0) for each group and the other two groups are of high strength concrete with aspect ratio (H/L) equal to 2.0 for both two groups. The deflections of concrete wall panels depend on the slenderness ratio (H/t), aspect ratio (H/L) and concrete strength. The failure mode of the concrete wall panels is greatly affected by the aspect ratio (H/L); the panels with low aspect ratio tend to fail by crushing, while panels with high aspect ratio tends to fail by buckling.
These systems show great promise by converting waste heat from photovoltaic modules into additional electrical power. The study analyzes the performance and efficiency of the hybrid PV-TEG systems under varying conditions, such as different solar concentration ratios, cooling methods, and materials. While these innovations promise to improve system efficiency, the review also identifies several challenges, including increased thermal resistance, higher system costs, and the minimal temperature difference across the TEG, which significantly limits its performance. This limitation, where the temperature differential is often too small to be effectively harnessed, reduces the TEG's overall efficiency and hinders the integrated system's potential gains. The review underscores the need for urgent and extensive research to develop optimized design configurations, durable mathematical models, and further experimental validation to ensure the practical viability of these systems under diverse environmental conditions. Despite these challenges, the potential of PV-TEG systems to revolutionize solar energy technologies is undeniable.PV-TEG performance is intricately linked to environmental conditions: higher solar radiation boosts efficiency, but increased ambient temperatures reduce it. TEGs often hinder PV cooling, yielding minimal efficiency gains. Non-uniform heat and low-temperature differences across TEGs further decrease performance. While hybrids can improve power conversion, high costs limit feasibility. However, with strategies such as enhancing solar concentration, using effective cooling methods like water or nanofluids, and advanced materials like phase change materials, the efficiency and reliability of these systems can be significantly improved
The thermal and acoustic isolation properties of unsaturated polyester composites reinforced by palm waste filler have been experimentally investigated. The composites have been prepared using hand lay-up technique with filler weight fraction of (0%, 3%, 5% and 7%). Three types of palm waste that (Date seed, old leaf bases and petiole) were ground and sieved separately to produce the filler with particle size ≤ 400µm. Thermal conductivity, thermal diffusivity, and specific heat capacity were examined using Hot Disk thermal analyses. The acoustic isolation property examined in a sound-insulated box. The experimental results show that the thermal conductivity and thermal diffusivity of the composite specimens reinforced by seed or old leaf bases filler increased with increasing the fillers weight fraction. While increasing the petiole filler decreased the thermal conductivity and thermal diffusivity by 19% and 40% respectively at 5% weight fraction as compared with a pure unsaturated polyester material. So, the composite reinforced with petiole filler has improved the thermal insulation properties. The composites samples reinforced with palm waste show higher sound absorption in compared to the pure unsaturated polyester material. The sound absorption properties of composite reinforced with 7% old leaf bases filler improved by 15% and 23% at low and high frequency respectively rather than of pure unsaturated polyester material.
The extensive global competition between companies and the development of new industrial technologies have greatly contributed to the current competitive conditions Like industrial companies, customers demand high quality products, low prices and better performance. This fierce competition has led to concerns about improved product design. This development is based on GQFD. Model of this developed Water pump is employed by CAD solid model (version 7). In order to achieve competition and high quality and high performance in the Iraqi market. GQFD demonstrates the balance between product development and environmental protection. Used a water pump for a home air cooler as a case study. Data is collected and distributed using personal interview methods and questionnaire forms to indicate customer requirements. The data is then analyzed using Pareto chart and AHP to prioritize customer needs. These priorities are then placed in house of quality and matrix of relationships between customer requirements and technical characteristics is established. The product has been developed from electrical to mechanical, in addition to using accumulated, stored and recycled materials; it also saves 20% of energy, thereby combining energy reduction with the use of damaged materials and their re-entry into work. As a result, the cost of pump manufacturing will decrease
Designing an integrated communications system with efficient features is important to researchers and designers. This paper deals with a review of the most important technologies and applications that combine solar cells and communication systems such as Li-Fi technology and its principle of operation, which is a wireless system in which the optical signal is used as a carrier signal as an alternative to the traditional radio frequencies used in Wi-Fi networks, where Li-Fi relies on LED to transmit data, and at high speeds that exceed Wi-Fi technology. Solar Power Satellite (SPS) technology where the satellite is placed in a geostationary orbit in the equatorial plane. As well as the application of photovoltaic solar cells in the SOLPLANT planar antenna, and the replacement of the radiating element of the antenna with a solar cell. The solar cell can transmit and receive electromagnetic signals as well as generate direct current and can be used as antennas either as a single solar cell or group cells and has wide applications in wireless, mobile, Bluetooth and satellite systems. The solar cell has also been applied in Micro strip antenna called Solan , where the solar cell antenna can be considered as a platform for many communication applications and can also be adopted as a radio frequency transmitter and receiver. As well as the design of many antennas integrated with solar cells and compatible with the 5G communication system , in addition to the presence of many applications that combined smart phones and solar cells. This study showed that these technologies and applications provided clean, safe, high-efficiency, high-speed, data-transferring communication systems with low cost.
Responding quickly and economically to the diversification of customer needs has forced manufacturing companies adopting approaches to delivering low cost, high quality sustainable products based on finding a link between the design or the manufacturing processes and other key elements of sustainability; economic, environmental, and social. However, these approaches had limited success. The most likely reason for the lack of integration between the design and manufacturing stages of the product and complexity of addressing the above mentioned three key elements of sustainability due to existing of many variables in relation to design, manufacturing, locations, logistic operations and so on. Taking into account the required integration as well as the associated complexity of considering sustainability elements can lead to large space alternative solutions and it is more difficult to use only exact methods to the optimization of such problem. This paper presents a genetic algorithm (GA) approach aiming to optimize a high sustainability performance by designing a product and the corresponding manufacturing processes for that product. Process optimization is carried out in terms of the highest fitness function achieved where different objectives are to be optimized simultaneously. The proposed GA approach is applied to the industrial case example. The proposed approach can assist decision makers to help explain when justifying their decision on what are the best product design and its manufacturing processes to obtain high sustainability performance.
The Digital control systems for substations have been installed in different areas of Iraq in the recent years. Most of these techniques used a Supervisory Control And Data Acquisition (SCADA) with Remote Terminal Unit (RTU) for monitoring the metering devices for incoming and outgoing feeders, while the other system used a Programmable Logic Control (PLC) technique for controlling and monitoring the system inside substations by professional engineers. A practical monitoring system of SCADA with RTU has been introduced in this paper for Falluja substation. There are 3 devices of RTUs are used to collect data from ION 6200 devices installed inside incoming and outgoing panels for low Voltage (LV 380V), 33KV and 11KV, then the data from each RTU will be send to the SCADA (main Computer) via special router, the SCADA system used ION enterprise software supplied by AREVA company in addition to all panels which supplied by the same company. Many difficulties were appeared during the work, such as mistakes of IPs, setting parameters, selection of protocols, and matching of devices have solved until the normal work was obtained to the substation.
To control on the operation of sheet metal forming without failure, A diagram is used in which the range accepted, failure and critical deformation range are shown. This diagram is known as the Forming limit diagram. It is considered as one of the important tool to determine the formability of sheet metals. Every sheet metal has its own forming limit diagram which determines its formability, strain limit and the forming regions. In this paper, the forming limit diagrams (FLDs) were experimentally evaluated for low carbon steel sheets with different thickness (0.6, 0.75, 0.85, 1.2mm). The highest limit strain in the forming limit diagram is found in the steel sheet at thickness (1.2mm) and the lowest limits in the steel sheet at (0.6mm), this meaning that the formability improve with increase the thickness of steel sheet. The effect of load punch is higher at biaxial stretch path and the lowest at uniaxial tension path. The load punch is change with different thickness of sheet at the same path. The maximum thinning is found in the biaxial stretch path and the lowest of thinning in plane strain path for all sheets.
Hydraulic actuators are one of the most viable choices due to their high power-to-weight ratio,low cost, robustness, fast response and great power supply. The present work focuses onbuilding an elevator prototype model simulates real hydraulic elevator. This model consists ofhydraulic parts (double-acting hydraulic cylinders, pump, valves, pipeline and filter) andelectronic parts (PLC, push-bottoms, relays and encoder). It is built with three floors in about300 cm height (total with the cylinder) to elevate a 30 kg payload and controlled by a PLCcontroller of (DELTA DVP-ES32) with 16 inputs and 16 outputs. The PLC receives input signals asorders from the operator as well as sensors and encoders. The PLC is programmed with WPSOFT2.46 Ladder diagram software to basically calling the elevator cabin through three locations andenabling its arrival at the desired floor. The cabin descent is achieved by using a proportionalcontrol valve which is controlled by the PLC. The cabin door is automatically opened and closedby DC motors. It is observed that, the application of this partnership between the PLC and theproportional valve in the build model helped to achieve excellent results in terms of systemcontrol and its efficiency, response, and smoothness.
Serial Concatenation Convolutional Codes (SCCCs) encoder is built using a serial concatenation of two Recursive Systematic Convolutional (RSC) encoders, separated by an interleaver. These two RSC encoders depending on the trellis termination criteria are software implemented and the performance of each one of them is analyzed under different conditions and circumstances. The output data from the encoder are multiplied by an amplitude matrix (AM) at the transmitter side and the Inverse of Amplitude Matrix (IAM) at the receiver side. The reliability estimation, log-likelihood algebra, and soft channel outputs for Soft Output Viterbi Algorithm (SOVA) are examined. Then the modified Viterbi metric that incorporates a-priori information used for SOVA decoding is derived. A low memory implementation of the SOVA decoder is presented. The iterative SOVA for SCCCs is described with illustrative examples. The behavior of the SCCCs encoder-decoder scheme is tested under different circumstances with AM and without AM at the AWGN and Rayleigh fading channels with unlike frame sizes (FS) and constraint length (K). The results show that the performance of system with AM outperforms the other conventional system that worked without AM.
The porous Titanium is characterized by high permeability which can assure the ingrowth of bone tissues, and consequently results in a good bonding between the metallic implant and the bone. In this work, Silicon element was added to the Commercially Pure Titanium at different weight percent of (2, 4, 6, 8 and 10) to investigate its effect on the porosity percentage, mechanical properties of the resulted samples. XRD analysis stated that at (Si) content lower than (2 wt%) the alloy is single phase (α- Ti alloy), as the Silicon content increased, in addition to (αphase), (Ti5Si3) intermetallic compound developed in the alloy. Porosity measurement results showed that the porosity percentage increases with the increase in Silicon content. Wear results stated that the wear rate increases with the increase in silicon content due to the increase in porosity percentage while the hardness results stated that there is no significant effect for Ti5Si3 intermetallic compound on improving the hardness of the samples. This is attributed to its low percent and the major effect of porosity on hardness which declined the effect of Ti5Si3 by reducing the hardness of the alloy compared with the master sample. The obtained results of the (yield strength, ultimate compressive strength and Young’s modulus) were within the values that match bone’s properties. This means these materials are suitable for biomedical application
An experimental study was done on a solar water heater which consists of two prisms of orthogonal triangle cross-section with a 210 liters capacity . The heater was easy to make and has a low cost when comparted with other types of solar water heaters that it usually the collector separate on the water store. The study included experimental investigations , the experimental investigation was done under the Iraqi environmental conditions at Baghdad for the period in summer and winter seasons in 2006 but the calculation for only two days 15/7/2006 and 6/12/2006 . The study included testing the heater with & without loading and it tested in 13/12/2006and14/12/2006. draining hot water from storage tank at different rates . The experimental result show the ability to get hot water at 46oC at December i.e. a temperature rise at 30oC with 16oC initial temperature .
Indeed, there are many hydrology variables influence on the operating of dam and reservoir system. Thus, modelling of dam operation is a complicated issue due to the nonlinearity of such hydrological parameters. Hence, the identification of a modern model with a high capacity to cope with the operation of the dam is extremely important. The current research introduced good an optimization algorithm, namely Genetic Algorithm (GA) to find best operation rules. The main aim of the suggested algorithm is to minimize the difference between irrigation demand and water release value. The developed algorithm was applied to find operation rules for Timah Tasoh Dam, Malaysia. This research used significant evaluation indexes to examine the algorithms' performance. The results indicated that the GA method achieved low Vulnerability, high Resilience and Reliability. It has been demonstrated that the GA method will be a promising tool in dealing with the problem of dam operation.
The world is moving now to the energy of water to generate electric power and too much on several considerations, most important is that this energy is a clean and renewable energies as well as reasonably available. So we are going to create a small hydro power stations with limited power can be linked via the national grid or the completion of feeding limited areas to ease the load on the national network in addition to low cost of establishment and the costs of power processed. And now that we need t this specification at this stage and the availability of waterways and weirs in the governorate of AL-anbar has been building this research. We have in this search by selecting the barrage of Fallujah for the establishment of a hydroelectric plant it was a survey of geographical and engineering on the site of this barrage was recorded the water levels over the full year and found that the height of the water in which at least 3.5 meters, so the choice of equipment needed to build a hydroelectric plant with capacity of (140) KW aided with catalogues of well known international companies and accredited globally.
This paper presents the experimental results of composite slabs under static and impact loading. Total of six specimens classified one specimen test under static loading and the remaining five were tests under impact dynamic loading with different parameters as type of connections and degree of interaction of composite slab. Low - velocity impact test was adopted by select the falling mass (4 kg) made from steel material and formed as ball shape without nose. The ball dropped freely from height of (2.4 m) and strikes the top of composite slab. The designed dimensions of specimens is (500×500×60 mm) as reinforced concrete slab that reinforced by mesh of (RBC) and the steel plate is (3 mm) in thickness. Deflection due to first crack is recorded, number of blows caused first crack and failure were counted. The test results showed that the welded stud connectors gives high strength capacity and resistance under static and impact dynamic loadings than other than type of connections, also, full interaction as degree of interaction is better than others
The detection of faults in electronic circuits is crucial to ensure the proper performance and reliability of electronic applications that utilize these devices. This work discovers, for the first time, that a direct tester board for fault diagnosis can be used not only for the intended measurement of current and voltage but also for studying the potential development of these magnitudes in inaccessible locations, as it detects register transfer level signals through oscilloscopes with low acquisition speeds. The experimental analysis carried out combines the use of commercial software with spatial distribution tracking and the exploitation of the sizes of network links in their computer graphical representation. The proper detection of malfunctions in electronic systems is crucial for enhancing their performance and reliability. We intend to explore the troubleshooting of analog electronic systems, for which we use wide-band direct tester boards. To evaluate its performance in routine practice, we perform experimentation using two different analog circuits designed. They consist of conventional operational amplifiers and element modeling based on equivalent resistance-capacitance networks. Given the procedure followed, commercial programs were used. Special mention should be made of the conclusion matrix, which is interesting when selecting suitable diagnostic parameters. The effectiveness of direct measurement based on integrated probes in the two projects, which allowed for fault insertion, was also confirmed. The results and discussions were enriched by the summarized experimental test report. The work concludes with a reflection on the relationship between this work and the existing state of the art, as well as the new challenges posed by international researchers.
Using three-phase synchronous generators basic units in power plants, the main source for feeding alternating current. The electromagnetic force (e.m.f) given by these generators depend mainly on the number of pairs of poles in the Member excitement and speed of rotation cycles of the generator. Since the number of pairs of electrodes are part of the structural arrangement of generator will not change due to overload, but it will be the adoption of frequency only on the speed with which revolves where the generator. The power transformers are the heart's main power plants and power transmission and delivery to the consumer and based on the work of the converted electric depends on electromagnetic induction, so the performance of work directly related to the frequency in which they operate. It is through this research will be identified on the behavior of each of the born Synchronous and transferred electrical in the case of low frequency. This is done checks of laboratory and compared to examine the system simulation through the language of MATLAB has been done to change the frequency and noting the effect on each of the power factor, efficiency and organization of voltages for each of the converted and born Synchronous and show results in the form of charts.
The city of Fallujah suffers from bad design in their network and it still dominated by the same pattern of the road and street network system that was produced by the previous stages of the development of the city, which is awaiting the necessary and appropriate solutions, which calls for planning to modernize the road network and streets in it that can accommodate the reality of the city’s condition and the proposed expansions for its subsequent urban growth. The transportation network in Fallujah city was chosen as a case study, the network was divided into roads and intersections, the evaluation included two main roads and eleven sectoral roads, eleven arterial roads, and twenty-five intersections. The network was evaluated in three stages, the first stage was traffic flow and service level, the second stage was evaluating the network in terms of road and intersections marking, while the third stage concerned with evaluating the network in terms of sustainability. The HCS 2010 program was applied to evaluate the first stage, while the second and third stages were evaluated based on the field survey. The results of the first stage showed that most parts of the network in the northern zone suffer from traffic problems and have a low level of service, while most parts of the network in the southern zone have a high service level and enjoy high traffic flow. Most parts of the network were suffered from bad marking, which causes many problems for the users of this network. Related to sustainability, we note a lack of interest on the part of designers or decision-makers. It was concluded that traffic solutions should be economically feasible for some parts of the network, which would lead to improving the network’s performance at the level of the three stages.
The research evaluated the wastewater effluents , Two pump stations discharged directly without any treatment in AL-WARAR Canal in Ramadi City ,located in the southern bank of the Canal . These effluents collects the storm water from the residential area , the drainage open channel which bypassing by septic tanks of domestic wastewater , bypassing from septic tanks of domestic wastewater. Laboratory Tests out on (December 2010 to May 2011) for the Canal (upstream) , wastewater effluents, and Canal ( downstream) to determine the quality characteristics and the wastewater effects upon the AL-WARAR Canal . The results show an increase in almost concentrations of characteristics compared to the Iraqi Standards NO. (25 –B1) in (1967) of the conservation of water resources , where the Bio-chemical oxygen demand , chemical oxygen demand and Total Bacterial Count were increased by (11, 9.7 and 535) times respectively. According to the organic load , the wastewater effluents classified as low strength . This study shows that the value of the reaction constant rate (k1) and Reaeration constant rate (k2)were about (0.187/day) and (0.556 /day ) respectively . Two stations downstream were located to determine the wastewater effects upon the Canal , Dissolved Oxygen was measured and calculated by using (STREETER –PHELPS) equations , then Sag curve of AL-WARAR Canal was determined .In spite of that the wastewater effluent does not comply with the Iraqi Standards discharged into water resources NO. (25 –B1) in (1967) , AL-WARAR Canal still comply with the Iraqi standards (NO. 25-A1) in (1967) of the conservation of water resources by the effect of self-purifications.
The performance of electronic devices, especially computers, depends on the efficiency of the electronic chips and Computer processing units, which are mainly made of semiconductors, so their working efficiency is inversely proportional to their working temperature. Therefore, this paper presents an experimental investigation of the design, implementation, and testing of three cooling systems to maintain the temperature of the processing unit as minimum as possible. The first is a traditional system dissipates heat from the working fluid to the air through a finned tube heat exchanger. The second successive hybrid system was designed to integrate with the first one in addition to a thermoelectric cooling system to cool the working fluid. The third system included in addition to the traditional heat dissipation one, an intercooler cylinder with a large quantity of the working fluid in the main system beside a separate system for cooling the working fluid using thermoelectric cooling to ensure sufficient cooling of the processing units when working at high frequencies by providing a large capacity of working fluid pre-cooled to a low temperature. Comparing the experimental results of the cooling systems with the traditional one under the same test conditions showed that the second system led to a reduction in the temperature of the processing unit by 5.2%, while employing the third system reduced the temperature to 11.3%., When the thermoelectric cooling unit operates at a performance factor of about 1.76.
The aim of this paper is to in investigate the performance characteristics of counter flow wet cooling towers experimentally by varying air and water temperatures, fins angle, rate of air flow, rate of water flow as well as the evaporation heat transfer, along the height of the tower. The analysis of the theoretical results revealed before that the thermal performance of the cooling tower is sensitive to the degree of saturation of inlet air. Hence, the cooling capacity of the cooling tower increases with decreasing inlet air temperature whereas the overall water temperature fall is curtailed with increasing water to air mass ratio. From the experimental study the efficiency of the cooling tower and cooling tower characteristics are higher in case of low mass flow ratio due to higher contact area of water to air. Because of better contact area between airs to water the drop in performance of the cooling tower is less. The effect of fins angle on the thermal performance of counter flow wet cooling tower was predicted. The experimental study showed that the cooling range, cooling coefficient, , heat load , change in air relative humidity and cooling tower effectiveness increased with increasing fins angles and optimum fins angle obtained from this experimental work was 70 degree, at this angle all cooling tower performance has been calculated were better. While the approach increased with decreasing fins angles, the minimum approach was obtained for 70 degree fins angles and the maximum approach was obtained for 30 degree fins angles.
This search includes analysis of Fallujah water network that are fed from the old drinking water treatment station in Fallujah , which provides citizens in residential areas (AL-Jolan District, AL- Mu'tasim district, AL-Andalus district) by drinking water by using a program (EPANET) in the hydraulic network analysis .It was found their are lack in the required amount of water which estimated by about 20% due to oldness of the station and the lack of expansion by estimation the population growth the city. After input required the data in the analysis in got the results, it was noted that the three areas were getting the amount of required water, but the speed of water in the pipe network was very low and below the allowable limits (less than 1 m / s), this means that the design of the network has not takes into account the economic side and health status. The results were compared with the situated case and found a lack of water amount reaching the people as a result of trespasses and interruptions which occurring in the network, as well as the head pressure which reach the supply points fall within the permissible limits where ranging between (38-48 m) but the use of water pumps in homes lead to decrease the head pressure whenever the node far away from the drinking water station.
In this paper, turbulent convective heat transfer in a triangular-ribbed chan-nel has been numerically investigated. SiO2-water with nanoparticles volume fraction of 4% and nanoparticles diameters of 30 nm is employed with Reyn-olds number ranging from 2000 to 8000. The governing continuity, momen-tum and energy equations in addition to low Reynolds number k-ε model have been transformed into body-fitted coordinates system and then solved using finite volume method. The effects of Reynolds number and rib heights on Nusselt number, pressure drop, thermal-hydraulic performance factor and entropy generation are presented and discussed. It is observed that the Nusselt number, pressure drop and thermal performance increase with in-creasing of Reynolds number and rib height. In addition, the highest perfor-mance factor can be obtained at Reynolds number of 6500 and rib height of 1.5 mm.