Composite laminate plates, fabricated by bonding fiber–reinforced layers, were dynamically analyzed under different combinations of number of layers, type of cutout, hole dimensions, angle of lamination and type of dynamic loading . This work was achieved by the well–known engineering software (ANSYS). The toughness of composite plates was evaluated in terms of the normal stress in the direction of loading at the periphery of the cutout. The toughness was found to increase by increasing the number of layers, by setting the lamination angle at around 40o,by selecting hole dimensions to width of plate ratio of around 0.4 and by employing square cutouts or avoiding triangular cutouts. Also, composite plates were found to be more strain-rate-sensitive in ramp loading, with least number of layers and with triangular type of cutout.
This research presents an experimental and theoretical investigation of the effect of cutouts on the stress and strain of composite laminate plates subjected to static loads. The experimental program covers measurement of the normal strain at the edges of circular and square holes with different number of layers and types of composite materials by using strain gages technique under constant tensile loads. A numerical investigation has been achieved by using the software package (ANSYS), involving static analysis of symmetric square plates with different types of cutouts. The numerical results include the parametric effects of lamination angle, hole dimensions, types of hole and the number of layers of a symmetric square plate. The experimental results show good agreement compared with numerical results. It is found that increasing the number of layers reduces the value of normal strain at the edges of circular and square holes of a symmetric plate and the maximum value of stress occurs at a lamination angle of (30o) and the maximum value of strain occurs at a lamination angle of (50o) for the symmetric square plates subjected to uni-axial applied load. The hole dimensions to width of plates ratio is found to increase the maximum value of stress and strain of a symmetric square plate subjected to uniaxial applied load. Moreover, the value of maximum stress increases with the order of type of circular, square, triangular and hexagonal cutout, whereas the value of maximum strain increases with the order of type of circular, square, hexagonal and triangular cutout.
The aim of current work is to investigate the tensioned composite plates with two types of cutouts. Many industrial applications use composite matrix with reinforcement fiber to obtain better properties. The objective of this work is divided into two parts, first the experimental work covers the measuring of the normal strain (εx) at the edges of (circular & square) holes that are perpendicular to the direction of the applied loads with different number of layers and types of cutouts of composite materials by using strain gages technique under constant tensile loads to compare with the numerical results. The second part is numerical work, which involves studying the static analysis of symmetric square plates with different types of cutout (circular – square). In static analysis, the effect of the following design parameters on the maximum stress (σx), strain (εx) and deflection (Ux) is studied. This part of investigation was achieved by using the software finite element package (ANSYS 5.4).
The Cooper-Harper rating of aircraft handling qualities has been adopted as a standard for measuring the performance of aircraft. In the present work, the tail plane design for satisfying longitudinal handling qualities has been investigated with different tail design for two flight conditions based on the Shomber and Gertsen method. Tail plane design is considered as the tail/wing area ratio. Parameters most affecting on the aircraft stability derivative is the tail/wing area ratio. The longitudinal handling qualities criteria were introduced in the mathematical contributions of stability derivative. This design technique has been applied to the Paris Jet; MS 760 Morane-Sualnier aircraft. The results show that when the tail/wing area ratio increases the aircraft stability derivative increases, the damping ratio and the natural frequency increases and the aircraft stability is improved. Three regions of flight conditions had been presented which are satisfactory, acceptable and unacceptable. The optimum tail/wing area ratio satisfying the longitudinal handling qualities and stability is (0.025KeywordsLongitudinal Handling---Stability---Tail Design
Plates with interior openings are often used in both modern and classical aerospace, mechanical and civil engineering. The understanding of the effects of two cutouts on the stress concentration factor, maximum stress and deflections in perforated clamped rectangular plates, were considered. Parameters such as location, size of cutout and the aspect ratio of plates are very important in designing of structures. These factors were presently studied and solved by finite element method (ANSYS) program. The results based on numerical solution were compared with the results obtained from different analytical solution methods. One of the main objectives of this study is to demonstrate the accuracy of the analytical solution for clamped square plate. In general, the results of the square clamped plates with two cutouts come out in good agreement. The results presented here indicated that the maximum stress, deflection of perforated plates can be significantly changed by using proper cutouts locations and/or size. The results show that the rectangular plate containing two cutouts arranged along the width is stronger and stiffer than when arranged along the length at a given spacing, and the square plate is always stronger and stiffer than an equivalent rectangular plate for the same loading condition.