This research paper is an attempt to reuse plastic waste fibre resulting from plastic sections industry as an additive to concrete matrix. The relationship between fibre volume fraction and mechanical properties of concrete and re-inforced concrete tiles was investigated. Three volume fractions of fibre ( 0.5 % , 1 % and 1.5 % - by volume of concrete ) were used through the experi-mental program. Tests’ results proved a slight decrease in concrete compres-sive strength as plastic fibre was added compared with the reference mix. Flexural behaviour of concrete tiles was enhanced as adding fibres. Adding fibre to Concrete results in a negligible reduction in concrete density. Fibre with high volume fractions improved Splitting tensile strength compared to the reference mix.
Since concrete is one of the most popularly utilized building mixtures in construction, a high demand of natural resources is significantly emerged. Therefore, a skyrocketed attention has been paid to create new opportunities for the use of recycle materials to develop a new construc-tion substance with more satisfactory properties. The use of waste products in concrete is not only economical, but it helps in solid waste management as well. Among various properties of concrete, thermal conductivity is a crucial factor that plays an important role in in building insu-lation by evaluating a material's capacity to transfer heat. This paper aims to review the potential application of waste materials in concrete as additive ingredients and investigate the effect of this waste material on thermal conductivity of concrete. The review of literature revealed that the application of most of the waste materials exhibited an obvious potential as thermal insulator. However, further investigated work is needed to highlight the advantages of utilizing waste mate-rials in concrete containing various type of waste materials
The convergence of cloud and edge computing in smart manufacturing offers significant potential for improving efficiency in Industry 4.0. However, task scheduling in this context remains a complex, multi-objective challenge. This study introduces a novel Cloud-Edge Smart Manufacturing Architecture (CESMA), leveraging a hybrid approach that integrates NSGA-II and the Improved Monarch Butterfly Optimization (IMBO) algorithms. The combination utilizes NSGA-II's global search and non-dominated solution capabilities with IMBO's fine-tuning and local optimization strengths to enhance task scheduling performance. Where CESMA combines the scalability and analytics power of cloud computing with edge-based real-time decision-making to address the dynamic demands of smart manufacturing. Through extensive simulations and experiments, the feasibility and effectiveness of CESMA are validated, showing improved task scheduling quality, resource utilization, and adaptability to changing conditions. This research establishes a robust platform for managing the complexities of task scheduling in cloud-edge environments, advancing intelligent manufacturing processes, and contributing to the integration of evolutionary algorithms for real-time industrial decision-making
In this paper, the hydraulic-thermal performance of a double-pipe heat exchanger equipped with 45°-helical ribs is numerically studied. The ribbed double-pipe heat exchanger is modelled using three heights (H = 0, 2.5, 3.75, 5 mm) of 45°-helical ribs. Two numbers (4-ribs and 8-ribs) of 45°-helical ribs are attached on the outer surface of the inner pipe of the counter-flow double-pipe heat exchanger and compared with a smooth double-pipe heat exchanger. Three-Dimensional computational fluid dynamics (CFD) model for a laminar forced annular flow is performed in order to study the characteristics of pressure drop and convective heat transfer. In addition, the influence of rib geometries and hydraulic flow behaviour on the thermal performance is system-atically considered in the evaluations. The annular cold flow is investigated with the range of Reynolds numbers from 100 to 1000, with three heights of ribs at the same width (W = 2 mm) and inclined angles of (θ = 45°).The results illustrate that the average Nusselt number and pressure drop increase with an in-creasing number of ribs, the height of ribs and Reynold number, while the friction factor decreas-es with increasing Reynolds numbers. The percentage of averaged Nusselt number enhancement for three rib heights (H = 2.5, 3.75 and 5 mm) at 4-ribs is (34%, 65% and 71%), respectively, While for 8-ribs the enhancement percentage is (48%, 87% and 133%) as compared with the smooth double-pipe heat exchanger at Re = 100. The best performance evaluation criteria of (PEC) at (8-ribs, and H = 5 mm) is 2.8 at Re = 750. The attached 45-helical ribs in the annulus path can generate kind of secondary flows, which enhance the fluid mixing operation between the hot surface of the annular gap and the cold fluid in the mid of the annulus, which lead to a high-temperature distribution. Increasing the height of 45°-helical ribs lead to an increase in the sur-face area subjecting to convective heat transfer.
In this paper, turbulent forced convection of nanofluid flow in channel with isoscelestriangularbaffles is numerically investigated over Reynolds number ranges of 5000-10000.One baffle mounted on the bottom wall of channel and another mounted on the top wall.Al2O3-water nanofluid with nanoparticles volume fraction of 4% and nanoparticles diametersof 25 nm is used. The governing continuity, momentum and energy equations as well as thelow Reynolds number k-ε model of Launder and Sharma have been solved using finitevolume method. The effect of baffle height, baffle distance as well as Reynolds number onthe flow and thermal characteristics have been presented and discussed. It is found that theenhancement ratio of the average Nusselt number as well as the fraction factor increase withincreasing in the baffles height. It is also found that the enhancement ratio of the averageNusselt number increases as the distance of top baffle decrease. Furthermore, the bestthermal-hydraulic performance of channel with triangular baffles using nanofluid can beobtained at baffle height of 2.5 mm, distance of the top baffle of 40 mm and Reynoldsnumber of 5000.
This research represents part of the current attempts to employ remote sensing data in the scopes of the civil engineering and the geotechnical engineering applications. There is great need to know the kinds of soil and their geotechnical properties, to create recent maps which have the capability and high flexibility to deal with them in digitizing way. Therefore GIS techniques are employed in the soil of area of study . By using ArcView software, a geographical database and information about soil chemical properties analysis have been registered and constructed digitally to represent the geotechnical soil characteristics maps . The work includes the digital image processing ( digital classification techniques) by using ERDAS, ver.,8.4 package, and classify the soil of study area by using the supervise and unsupervised techniques . The geotechnical maps by using GIS techniques depend on remote sensing data are the better to represent the ground truth regarding the characteristics of soil , in comparison with the traditional method, because they are easy way to produce, use, store and update, in addition they save in efforts, time and cost . The results of this study have shown that the soil of study area is gypsum where it ratio exceeded the allowable ratio ( 10.75 % ) for all samples . In addition the total Soluble Salts ratio and SO4 ratio high compared to allowable ratio (10 % , 5 %) respectively .
This paper deals with a numerical investigation of natural convection of heat transfer in a horizontal eccentric annulus between a square outer enclosure and a heated circular inner cylinder. The governing equations are expressed by the term of the stream function-vorticity with dimensionless temperature. The body fitted coordinate system (BFC) was used to stretch over the physical domain of the presented problem. The Poission's equation of stream function is solved by successive over relaxation (SOR) method, while time marching technique was the best choice to solve both vorticity and energy equation.The results are presented for the streamlines and isotherms as well as the average Nusselt number at different eccentricities and angular positions. Comparison with previous theoretical results shows good agreement.
Indeed, there are many hydrology variables influence on the operating of dam and reservoir system. Thus, modelling of dam operation is a complicated issue due to the nonlinearity of such hydrological parameters. Hence, the identification of a modern model with a high capacity to cope with the operation of the dam is extremely important. The current research introduced good an optimization algorithm, namely Genetic Algorithm (GA) to find best operation rules. The main aim of the suggested algorithm is to minimize the difference between irrigation demand and water release value. The developed algorithm was applied to find operation rules for Timah Tasoh Dam, Malaysia. This research used significant evaluation indexes to examine the algorithms' performance. The results indicated that the GA method achieved low Vulnerability, high Resilience and Reliability. It has been demonstrated that the GA method will be a promising tool in dealing with the problem of dam operation.
Numerical solutions are presented for mixed convection from an array of circular cylinders embed in a saturated porous medium. The cylinders are at constant temperature(isothermal) and arranged in a staggered tube bank. Both aiding and opposing flow conditions are considered. Numerical calculations using finite difference method with body-fitted coordinates have covered a wide range of governing parameters(i.e.,10 ،ـ Re ،ـ 100, 0 ،ـ Gr ،ـ 400 and Pr = 0.7). Results are presented for streamline, isotherms and the local and the average Nusselt number at different values of the governing parameters. The present results are compared with previous theoretical results and show good agreement
A numerical investigation of mixed convection from a horizontal cylinder in a saturated porous medium is presented. The governing equations based on Darcy’s law are expressed in a body- fitted coordinate system and solved numerically by explicit method. The direction of the flow varies between the vertically up ward(assisting flow) and vertically downward(opposing flow). Results are presented for Reynolds number Re from 10 to 100 with Grashof numbers up to Gr =5Re. The Prandtl number was kept at a constant value of 0.7. results are presented for the streamlines and isotherms as well as the local and average Nusselt number at different values of governing parameters. Comparison with previous theoretical results show good agreement.
This article presents a numerical study on forced convection of nanofluid flow in a two-dimensional channel with trapezoidal baffles. One baffle mounted on the top wall of channel and another mounted on the bottom wall of channel. The governing continuity, momentum and energy equations in body-fitted coordinates are iteratively solved using finite volume method and SIMPLE technique. In the current study, SiO2-water nanofluid with nanoparticles volume fraction range of 0- 0.04 and nanoparticles diameters of 30 nm is considered for Reynolds number ranging from 100 to 1000. The effect of baffles height and location, nanopar-ticles volume fraction and Reynolds number on the flow and thermal fields are investigated. It is found that the average Nusselt number as well as thermal hydraulic performance increases with increasing nanopartiles volume fraction and baffle height but accompanied by increases the pressure drop. The results also show that the best thermal- hydraulic performance is obtained at baffle height of 0.3 mm, locations of baffles at upper and lower walls of 10 and 15 mm, respectively, and nanoparticles volume fraction of 0.04 over the ranges of Reynolds number.
Solar cells play a vital role in renewable energy systems, and ongoing research is dedicated to enhancing their power efficiency and longevity. Advancements in perovskite solar cells, particularly in power conversion efficiency (PCE), have shown significant progress, confirming its viability as a technology. Perovskite solar cells have achieved power conversion efficiency (PCE) levels of up to 25.5%, comparable to conventional photovoltaic technologies like silicon, gallium arsenide, and cadmium telluride. The substantial enhancement in power conversion efficiency figures over the last decade has shown a remarkable advancement in the efficiency of perovskite solar cells. This study examines the trajectory of perovskite solar cells in becoming economically feasible and generally embraced as a critical renewable energy technology. The advancement of flexible and wearable solar cells, together with miniature solar-powered sensors, has increased the efficiency of solar cell power production. Perovskite solar cells have shown a specific power of 23 W/g, much higher than traditional silicon or gallium arsenide solar cells. Further research is needed to address the challenges related to perovskite solar cells' stability and power conversion efficiency. Perovskite solar cells integrated with energy storage units have the potential to enhance the overall efficiency of the system. This study discusses an approach to improve the efficiency of novel solar cells, specifically focusing on lead-free tin-based perovskite solar cells and tandem solar cells. The advancement of technology in thin films, such as hybrid nanocomposite thin films and quantum dot-sensitive solar cells, has the potential to improve the efficiency of solar cells. The primary outcome of this study is derived from the following inference: incorporating plasmatic nanostructures into thermal energy systems will enhance their efficiency and sustainability by integrating solar energy.
Natural convection heat transfer in two-dimensional region formed by constant heat flux horizontal flat tube concentrically located in cooled horizontal cylinder studied numerically. The model solved using the FLUENT CFD package. The numerical simulations covered a range of hydraulic radius ratio (5, 7.5, and 10) at orientation angles from (0o up to 90o). The results showed that the average Nusselt number increases with hydraulic radius ratio, orientation angles and Rayleigh number. As well as enhancement ratio for Nusselt number at orientation angle 90o and hydraulic radius ratio 7.5 equal 24.87%. Both the fluid flow and heat transfer characteristics for different cases are illustrated velocity vectors and temperature contours that obtained from the CFD code. The results for the average Nusselt numbers are compared with previous works and show good agreement.
This study focuses on improving the thermal comfort in Mosques in Iraq. Omar bin Abdul Aziz Mosque in Baghdad is taken as a case study. In general, the weather in Baghdad is hot- dry climate during the summer. the study was conducted at the time of noon prayer on Friday where the maximum number of people can be obtained inside the Mosque about 500 worshipers and severe environmental conditions. Numerical methods (CFD) are used for the simulation utilizing the package of ANSYS (FLUENT V. 18). As the results depending on the number of elements, 4 millions elements are used for dividing the physical domain. Thermal comfort was assessed by finding the values of the predicted mean vote (PMV), predicted percentage of dissatisfied (PPD), and ASHRAE standard-55. The adaptive redistribution of the air conditioning device strategy at five cases is used to obtain the best thermal comfort. Moreover, changing the angle of air intake of space by changing the angle inclination of the access blade at three different angles of 0o, 7.5o and 15o degree, and studying its effect on the thermal comfort in breathing level. The four case is the best in terms of thermal comfort when the angle of intake air at 0o.when the PMV was 0.35 and PPD is 7.5, which is lower than the original state. The improving percentage of PPD is 10 % and PMV 14 %.