The studying of the distribution of wetting patterns in soils having a stratified profile is of great importance due to the presence of this type of profile in abundance in agricultural lands, including greenhouses. Therefore, there was a need to develop a numerical program that predicts the dimensions of the wet area of the subsurface drip irrigation system under different operating conditions for purpose design and manage these systems properly to avoid water losses resulting from evaporation or deep penetration. The present study aims to develop a two-dimension model simulates the wetting pattern in stratified soils using (HYDRUS-2D) software and study the effect of soil hydraulic properties and different operating conditions on the progress of the wetness pattern and the interference pattern between two wetting fronts. Laboratory experiments were carried out for the system of subsurface drip irrigation in stratified soils that consisted of three layers (silty clay loam soil, loamy sand soil, and sand soil) arranged from bottom to up. Three different emitter flow rates 0.5, 1, and 2 l/h were tested, as well as three different initial moisture contents for each soil layer were considered. The interference pattern between two wetting fronts of two emitters with different spacing between emitters 30, 40, and 50 cm was studied. A numerical model was developed to guess the horizontal and vertical dimensions of the wetting zone for the single emitter and the pattern of interference between the two wetting fronts of two emitters. The predicted values obtained from the numerical model were compared with those obtained from laboratory experiments. Statistical analysis of the obtained data showed that the developed numerical model has a good ability to guess the dimensions of the wet pattern of the single and the two emitters and there were good agreements between the predicted and the experiments results and minimum values of RMSE ranged between 0. 5 and 3.6 were achieved.
Water treatment sludge (WTS) is a byproduct generated during the treatment of wastewater. In recent years, researchers have explored the potential of using WTS as a soil stabilizer to improve the geotechnical properties of soils. In this review, we will examine the current state of knowledge on the use of WTS for this purpose. The organic matter content of WTS is usually high and can range from 30% to 60%. The high organic matter content makes WTS a potential source of nutrients for plants, and it can also enhance soil structure and water retention. Another important consideration is the environmental impact of using WTS. The use of WTS can be an eco-friendly alternative to chemical stabilizers, which can have adverse effects on the environment. However, there are concerns about the potential for heavy metal contamination in WTS. To mitigate this risk, it is recommended to conduct thorough testing of WTS before using it as a soil stabilizer. Finally, the use of WTS as a soil stabilizer has the potential to improve the geotechnical properties of soils. However, it is essential to consider factors such as the type and dosage of WTS, the soil type, and the environmental impact before using it. Further research is also needed to explore the potential of using WTS in different soil types and environmental conditions.